Let’s look at the Whiteline Roll Center Adjustment Kit for the Subaru BRZ/Scion FR-S.

For those of you who purchased a Subaru BRZ, or a Scion FRS, chances are you might start playing with the suspension at some point. One of the common first modifications are coil overs.People are partial to improved handling, and others want to scrape everywhere. Eitherway, a roll center kit should be the line of modifications.


According to the description on RallySport Direct’s website, a roll center is designed to raise front roll-center geometry after lowering the vehicle and also improve on the original bump-steer geometry.  Changing front suspension geometry by raising roll-center results insubstantial increase to roll resistance and significant reduction of suspension compression of outside front wheel during cornering through improved weight transfer distribution. So basically it improves the handling of a car after it has been lowered to street sweeper status.




Let’s take a close look at the Whiteline Roll Center Kit for the BRZ/FRS 2013-2014. This is a complete kit ready to install. Comes with 2 steering arm tie rod ends, and 2 ball joints. Installation requires you to remove your front wheels, and you should be able to install this with basic hand tools. However professional installation is recommended.



Finally you will need an alignment after these are installed. Afterwards you can enjoy the full potential of your coil overs. No more white knuckling while on the highway. For more information, or to make a purchase, visit www.rallysportdirect.com, and get yourself a Whiteline Front Roll Center Adjustment Kit.


PN: KCA435

Whiteline Front Roll Center Adjustment Kit Subaru BRZ 2013-2014/Scion FR-S 2013-2014




Leave a comment

Please be polite. We appreciate that. Your email address will not be published and required fields are marked